Product Index

Preview Image Name Short description
Application Conformal Coating
Board InverterThe Board inverter turns a board upside down to make processing possible on both sides without manual intervention. A board transfer cycle consists of infeed, flip or no-flip, and outfeed. Up to 10 different board transfer cycles can be stored. The machine is bi-directional and can receive and send boards both up- and downstreams.
DL ConveyorThe Dual lane conveyor is the first product in a continuing series of Dual lane equipment. Each lane has its own standard SMEMA interface, which makes the conveyor easy to install in a dual lane electronics assembly line. Conveyor width adjustment is motorized.
DL Turn UnitThe Turn unit routes boards from 1, 2 or 3 infeed sides, to 1, 2 or 3 outfeed sides. Board infeed/outfeed routing can be fixed, based on board flow, and/or based on priority values set via the control panel. Outfeed routing can also be controlled by external signals such as Good/No Good board or by a barcode reader.
FIFO Buffer 10The FIFO Buffer 10 has an advanced optional cooling function and is designed to balance station-capacity differences by offering board escape possibilities in case of failures or slow board flow in the connected systems. Buffer full warning level, start slot, stepping (pitch), pass through slot and cooling time are adjustable from the operators panel.
Flash Off Conveyor
High Top
Flash Off and Inspection Conveyor with Glass Door
Suitable for conformal coating applications with pallets or boards. The sliding glass door gives access to the internal conveyor and boards. Optional- High power UV blue inspection light or switch selectable white light. Ventilation guard with infeed blocking. Timer for controlled flash off time
Up and Down LiftUp and Down Lift
for pallets and solder frames, to be placed in the beginning or end of a production line. Standard or special infeed and outfeed heights.
UV 1600 UV Conformal Coating Curing Oven

Multi-wave-length Arc-lamps cures coatings and glues without the need for change of type of lamps for different material.

Overall length of only 1600 mm, including -Inspection module -Dual Arc lamp ramps and cooling zone.

Energy efficient
Energy consumption is controlled by the built-in PLC. UV lamps go to stand by mode when no PC boards are in the machine.Only lamps needed for actual board width is turned on for lowest energy consumption

UV Inspection StationThe UV Inspection Station is suitable for solvent or UV cured coating or glue. For inspection of wet material connect exhaust system. The rigid framework makes it possible to add-on option for transporting heavy load carriers up to 15 kg. Communication with preceding and following units is done via the standard SMEMA interface


Heating Conveyors
Contact Us for more information